Contact Lens Pioneers (2024)

Contact Lens Pioneers (1)The history of contact lens development is long and rich. As early as the 1500s, the worlds best thinkers already had conceived of the basic principles of contact lenses, even if a true contact lens that could be successfully worn on the eye was still centuries away.


In the late 1880s, glass contact lenses were invented, but that was followed by nearly four decades of very little technological improvement. By the mid-1930s, a few pioneering individuals were about to change the contact lens in dramatic ways. We start this series with the stories of the men who invented and undertook the early development of the modern contact lens. They paved the way for a largely theoretical concept to become reality and for contact lens wear to become a practical method of refractive correction for millions of people.


[ William Feinbloom, O.D., Ph.D. (1904-1985) ]

William Feinbloom graduated from the now-defunct Columbia University School of Optometry in 1923, at the tender age of 19, and began practicing in Buffalo, N.Y. He was dismayed to find that he could do nothing to help one of his very first patients, a severely visually impaired man. The young optometrist began tinkering with spectacle-mounted telescopesthe start of a lifelong interest in low vision rehabilitation.


Contact Lens Pioneers (2)In 1933, he published a paper about his first 500 patients with subnormal vision. In 1939, he received a doctorate in physiologic optics. He went on to design more telescopes, low-vision microscopes, and other visual aids, some of which are still sold by Designs for Vision, an optical products company founded by Dr. Feinbloom in 1961 and currently headed by his son, Richard Feinbloom.


Late in life, when Dr. Feinbloom developed macular degeneration himself, he reportedly saw the silver lining in his condition, noting that only now could he truly understand what his low-vision patients had experienced.


Like many pioneers, Dr. Feinbloom had a strong entrepreneurial spirit. In the 1930s, he developed the Feincone system for fitting scleral lenses and sold the trial lens sets to optometrists all over the country.


When I started practice in 1947, I tried to fit some patients with scleral lenses using this system and even wore them myself for a very short time, remembers Robert Koetting, O.D., founder of The Koetting Associates, in St. Louis, Mo.


Dr. Feinbloom was also one of the three original partners in Frontier Contact Lens Company of Buffalo, N.Y. That partnership dissolved long before Frontier began making the soft contact lenses that were sold to Johnson & Johnson and eventually became known as the Acuvue brand contact lenses. He even patented some designs for bifocal and trifocal scleral contact lenses in the mid-1930s.


But Dr. Feinblooms key contribution to the field of contact lenses was recognizing the many advantages of substituting plastic for glass in the eye. In 1936, he introduced and patented the first contact lens containing plastic. This lens had a central glass optic that covered the cornea with an opaque plastic flange over the sclera.


At the time, glass contact lenses were the standard, but had never been very successful. Glass was transparent, but it had a number of disadvantages, including weight and complete lack of oxygen permeability that rapidly led to discomfort and corneal hypoxia for the wearer. The lenses were also difficult to make.


With plastic, the lens weight could be reduced, the material could be formed and shaped easily, it had good compatibility with ocular tissue, and was more comfortable in the eye than glass.


Initially, Dr. Feinbloom used the only plastic available
to himan opaque resin plastic that would not have been effective for the optical portion of the lens. But his ideas were prescient. PMMA, which has superb optical properties, was introduced in the U.S. that same year and rapidly became the material of choice for hard contact lenses.


Many remember William Feinbloom as a tireless advocate. My father was generous with his time and his knowledge, recalls son Richard Feinbloom. And he was passionate about helping people with low vision.
[ Kevin M. Tuohy (1921-1968) ]

In 1948, A California optician who worked for Solex Laboratories, Kevin Tuohy, filed a patent for the first corneal contact lens, which was made entirely of PMMA. His discovery beganas so many dowith a laboratory mistake. A scleral lens was accidentally lathed in two, leaving a smaller corneal button. Tuohy tried the damaged lens on himself to see what would happen. After more experimentation, he filed his patent and published a fitting manual for the new lenses.


Mr. Tuohys contact lens was a large, thick, flat lens with blunt edges that would hardly be considered revolutionary today. But in the late 1940s, it marked a major shift from scleral to corneal contact lenses.


Prior to this, many fine optometrists, ophthalmologists, and scientistsincluding Theodore Obrig, Philip Salvatori, Ernest Mullen, Itsvan Gyorrfy, Solon Braff, and Edward Goodlawhad been designing and producing all-PMMA lenses in scleral designs. PMMA was introduced in the U.S. by Rohm and Haas Company in 1936, and many laboratories began making plastic contact lenses on a limited scale shortly thereafter. These lenses were a vast improvement on earlier glass lenses, especially with fitting modifications and new design elements such as fenestration; but they continued to suffer from the problem that all scleral lenses trapped tears between the lens and cornea, resulting in corneal hypoxia.


Because of this, scleral contact lens fitting remained a very limited procedure undertaken by relatively few people around the world. But after the introduction of the Tuohy corneal lens, contact lens sales increased from 50,000 pairs in 1946 to 200,000 pairs in 1949.2


The primary advantage offered by this revolutionary combination of lightweight plastic and a corneal design was the potential for increased tear exchange behind the lens, Mertz says of the Tuohy lens.3 Patient comfort was still a limiting factor, but Mr. Tuohys innovation enjoyed great success by the standards of the day.


The Tuohy lens served as the basis for ongoing design changes to PMMA lenses that dominated the market prior to the introduction of soft contact lenses. The first and most important change was made by George Butterfield, who added peripheral curves to the posterior surface in 1950, introducing the modern concept of fitting the lens on the Ks.1 During the 1950s and 1960s, corneal PMMA lensesmade by Obrig Laboratories, Breger-Mueller-Welt in Chicago, and the Plastic Contact Lens Co (Wesley-Jessen), among othersalso became thinner and smaller.


Unfortunately, PMMA, like glass, is impermeable to oxygen. The resulting corneal oxygen deprivation caused many problems for contact lens wearers that researchers would spend decades more trying to address.

[ Newton K. Wesley, O.D., F.A.A.O. (b. 1917) ]

Contact Lens Pioneers (3)Newton K. Wesley, O.D., is often credited with developing the first commercially successful rigid contact lens, in the mid-1950s. His lens, building on what Tuohy and Butterfield had done, was a 9.2-diameter lens, fit on the flattest K. Its interesting that, all these years later, 9.2 is still the best diameter, said Frank Fontana, O.D., one of the founders of the AOA Contact Lens Section.


But his greatest contribution to the field of contact lenses may have been in his teaching skills. Dr. Wesley and a former student of his, George Jessen, O.D., together started the Plastic Contact Lens Company, later to be called Wesley Jessen VisionCare, Inc., a leading manufacturer of specialty contact lenses, including toric, colored and opaque cosmetic lenses. Wesley Jessen was eventually acquired by CIBA Vision in 2001.


Wesley and Jessen taught all of us how to fit contact lenses, Dr. Fontana said. They almost single-handedly developed the market for contact lenses, just by traveling around the country educating people. At the time, contact lens fitting was still a new field, and many thought contact lenses were unsafe; but Dr. Wesley and Dr. Jessen believed wholeheartedly in them. They continued to develop new lenses for decades, achieving FDA approval of their own hydrogel soft contact lenses in 1978.


In 1955, Dr. Wesley founded the National Eye Research Foundation, best known for its orthokeratology and keratoconus work, and remained its chairman for many years. In the 1990s, he pursued software applications for retinal sensitivity analysis. Well into his 80s, Dr. Wesley continued to be an active entrepreneur and innovator.

[ Otto Wichterle, Ph.D. (1913-1998) ]

Otto Wichterle was a brilliant Czech polymer chemist who had already worked on one of the worlds first synthetic fibers. In 1954, he and colleague Drahoslav Lim at the Institute of Macromolecular Chemistry of the Czechoslovak Academy of Sciences invented the first hydrogel material, hydroxyethyl methacrylate (HEMA). They were seeking a synthetic biocompatible material for implants elsewhere in the human body and initially published their findings in the journal Nature in a 1959 article entitled Hydrophilic gels for biological use.


Contact Lens Pioneers (4)When a chance encounter with an ophthalmologist on
a train gave Prof. Wichterle the idea that the gels he was working with would also be effective in the eye, he began his successful quest to make a contact lens. He later worked with American collaborator Robert Morrison, O.D., and others to improve the lenses.


The original Wichterle lenses provided relatively poor acuity with thick yellowish material, but they were comfortable, according to Mandell.1 The HEMA material was transparent, free of impurities, and was permeable to oxygen and water-soluble nutrients. Prof. Wichterle patented his
lenses in the U.S. in 1962 and 1965. Mandell notes that these original lenses were by no means a great success prior to their refinement and commercialization by Bausch & Lomb, which eventually acquired the patents for the HEMA contacts.1


Contact Lens Pioneers (5)Prof. Wichterle quickly realized that he also needed a faster, more reliable method of fashioning the HEMA material into a contact lens than the closed-mold process hed been using. With various combinations of his childrens construction toys, a hot plate, bicycle parts and a phonograph motor, he built a primitive spin casting devicesomething that was familiar to polymer chemists for other applications but had never been used for contact lenses.


This device was no toy, Morrison said. It was a clever creation in which raw liquid HEMA polymer was introduced via a tube into a mold that was spinning.4 Heat from the hot plate was the catalyst to turn the liquid HEMA into a gel. Technicians at his institute helped him automate the device, which he would later patent (in 1961) as a method for making soft lenses. He and his wife manufactured 5,500 lenses in 1962 with the spin casting machine.1 At the time, he reportedly thought the low cost and high reproducibility of spin casting could make a disposable lens approach economically feasible, although it would be many years before that would become reality.
3


Prof. Wichterles contact lens work was often hindered for political reasons and was not fully appreciated until late in his life. When Germany invaded Czechoslovakia in World War II, the Nazis closed the universities, interrupting his research, and even imprisoned him for a few months. Later, when Czechoslovakia came under Soviet influence, he was thrice removed from senior positions in political purges. In one case, he lost his position as head of the Institute of Macromolecular Chemistry (where he developed HEMA), due to his support for the unsuccessful anti-communist Prague Spring uprising. Finally, after the 1989 Velvet Revolution and Czechoslovakias turn toward democracy, he was named president of the Czech Academy of Sciences and recognized for his contributions.

But while Prof. Wichterle struggled against political forces in his own country, his concept of a lens comfortable enough to be worn for a good portion of waking hours had revolutionized the contact lens field elsewhere. Within just a few years after Bausch & Lomb commercialized his lenses (and the spin casting technique, which the company also acquired), the vast majority of Americans wearing contact lenses were wearing hydrogel contact lenses, and millions of people worldwide still wear them.


[ Robert Morrison, OD (b. 1924) ]

Robert Morrison, a self-described mediocre student, dropped out of college to join the Army during World War II. He decided on optometry because Pennsylvania College of Optometry was accepting veterans without full college degrees. After graduation, the ambitious young doctor built a thriving practice in his hometown of Harrisburg, Pa., which he later expanded to a part-time practice in New York City, as well. He was very interested in contact lenses and had already been making rigid contact lenses in a small optical lab in his office when he heard about Otto Wichterles paper on hydrophilic gels. In 1961, Dr. Morrison traveled to what was then Czechoslovakia, and brought some of the material back home with him. He wasnt the first person to visit Prof. Wichterle and hear about his new lens technologybut he was the first to embrace the potential of a hydrophilic material for contact lenses.


Wichterles accomplishments might have died behind the iron curtain were it not for the persistence of Robert Morrison, said Joe Shovlin, O.D. Dr. Morrison and Prof. Wichterle traded ideas back and forth over several years, and Dr. Morrison became the first American to fit the lenses in practice. The two were close friends for a while, although the friendship was strained by the legal wrangling that surrounded the transfer of Wichterles HEMA patents.


Dr. Morrison was eager to have the patents in order to continue his own work with soft contact lenses, but he was forced to share them with a group called the National Patent Development Corporation (NPDC). The NPDC bought out Morrisons share soon thereafter and eventually licensed the technology to Bausch & Lomb, which refined it and brought the first soft hydrogel contact lens, the Soflens (polymacon), to market in 1971. The FDA decided the lens was a drug, which created a major hurdle for B&L. Once past that hurdle, however, the company enjoyed a three-year monopoly on soft contact lenses in the U.S., during which time it dominated the marketplace and PMMA became nearly obsolete.


Contact Lens Pioneers (6)In addition to serving as the bridge between Otto Wichterle and the West, Dr. Morrison was a skilled contact lens fitter who truly had one of the first optometric practices to specialize in the young field of contact lenses. He became known as the eye doctor of the rich and famous, treating Hollywood stars and international royalty, and once received a Rolls Royce from Queen Juliana of the Netherlands as payment for his services. More than 40 years later, he still drives that car sometimes.


Dr. Bob has shown how much one person can contribute to the world during a lifetime, and how much fun and adventure he can experience while doing it, said Dick Thornburgh, former U.S. Attorney General, former Governor of Pennsylvania, and a longtime patient of Morrisons.


Dr. Morrison enjoyed a long career treating patients, lecturing and teaching. He recently published a book about his life and career.4 I wrote it for my grandchildren, Dr. Morrison said. I wanted to make sure they got the facts straight when they hear some of the tall tales about their grandfather.


All of the individuals described here were path-cutters, charting a difficult way in completely unknown territory. They laid the foundations for both rigid and soft contact lenses and established a role for contact lenses in refractive correction that is now taken for granted. But in some ways, they raised more questions than they answered: What were the oxygen requirements of the cornea? Was there a material that would be comfortable and healthy over the long term? How long could contact lenses be worn? How should they be fit? How did one manage a contact lens practice?


In future installments of this series, well look at the people and the companies that refined lens material and design, built the manufacturing capabilities to revolutionize the industry, educated their colleagues about fitting, marketing, and the oxygen requirements of the cornea, and built the first contact lens specialty practices.

Contact Lens Pioneers (7)


1. Mandell RB. Historical development. In: Mandell RB. Contact lens practice. Springfield, Ill.: Charles C. Thomas, 1988:5-20.

2. Kuwabara DM. History of the Cornea & Contact Lens Section, American Academy of Optometry website.

3. Mertz GW. Development of contact lenses. In: Hamano, H and Kaufman H E. Corneal physiology and disposable contact lenses. Boston: Butterworth-Heineman, 1997:65-99.

4. Knorr R, Kremer K. Man of Vision: The Story of Dr. Robert Morrison. Osprey, Fla.: SIS Publishing, 2006.

Vol. No: 144:07Issue: 7/15/2007

Contact Lens Pioneers (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Fredrick Kertzmann

Last Updated:

Views: 6115

Rating: 4.6 / 5 (46 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Fredrick Kertzmann

Birthday: 2000-04-29

Address: Apt. 203 613 Huels Gateway, Ralphtown, LA 40204

Phone: +2135150832870

Job: Regional Design Producer

Hobby: Nordic skating, Lacemaking, Mountain biking, Rowing, Gardening, Water sports, role-playing games

Introduction: My name is Fredrick Kertzmann, I am a gleaming, encouraging, inexpensive, thankful, tender, quaint, precious person who loves writing and wants to share my knowledge and understanding with you.